The Tracker i50b provides multiple RS-232
serial ports and I/O ports to connect to most remote telemetry
devices. The powerful microprocessor can be programmed to provide
intelligent monitoring at the remote site, greatly reducing data
flow to alerts when a problem occurs, or to transmit readings when
required. This reduces airtime costs when using a satellite link. The
i50b can be supplied with either an internal Iridium modem or GSM-GPRS modem.The i50b can be supplied
in its own enclosure, or as an open circuit board assembly for
installation into 3rd party enclosures.
Click here for complete specifications.
The RMI-310 telemetry terminal can provide a low
bandwidth satellite link between 3rd party SCADA devices such as RTUs, PLCs,
temperature and chemical sensors, siesmographs and control valves etc., and
host HMI programs or databases.
The RMI-310 is fully self contained with a powerful
microprocessor that can be programmed to handle 3rd party proprietary
protocol interfaces. The microprocessor also controls the internal Iridium
9601 SBD satellite modem for error free transmissions.
The RMI-310 is housed inside a common 3" dia PVC pipe
to minimize vandalism at unattended sites. Sitting on top of a 10ft 3" dia'
PVC pipe it appears to be a simple vent pipe, and not an expensive
communication device. The terminal is fully compatible with our DataGate control
hub and can be remotely programmed. Click here to view
programming screens.
TELEMETRY HARDWARE BY DATALINK
Datalink Systems Inc offer an "end
to end" hardware/software solution that can accommodate most remote
telemetery requirements.
Click here for an overview of our IPSCADA software.
The i50b internal circuit board and firmware can also be
custom developed to address a specific application.
Click here to view
internal pictures.
last update: Sept-20-2008
Copyright: Datalink Systems Inc. 2008
