i50B Tracker
“G” force accelerometer standard feature.

Coming soon !! Garmin "two-way" dispatching and text messaging "add-on".

The i50b TRACKER has ten years of design experience behind it. Available with optional Iridium SBD Satellite modem and/or GSM GPRS quad band modem for world wide operation. Can be ordered as a complete end to end, ready to run solution, including back-end software,, or as an OEM circuit board assembly with firmware for installation into 3rd party enclosures. Click here for more details.

The i50B Tracker is fully integrated with our DataGate "back end" IP routing software, allowing complete "end to end" performance with a choice of mapping programs and client workstation software (optional) or direct connection to most Database programs.

Our DataGate IP routing software is included free with orders for 50 or more i50B terminals.

Click here for our MSRP "end user" pricing structure.

FUTURE DEVELOPMENT

Coming soon will be an option to plug in a Garmin "turn by turn" mapping and guidance terminal. This will also allow messages and destination details to be sent from the base computer running DataHost and the Garmin terminal. The driver will be able to send "canned" messages to the base office.

TRACKER i50B GENERAL SPECIFICATIONS

FEATURES

50 channel uBlox LEA 5H GPS receiver (supports GPS and GALILEO signals)
Internal satellite and cellular modems with dual operation (optional)
Internal Wi-Fi modem (optional)
Three external RS-232 serial ports (only two available when using internal Wi-Fi)
Sleep mode with adjustable timeout and periodic wakeup timer
Wide input voltage range with load dump protection
Battery voltage monitoring
Four digital inputs plus Ignition input
Four digital outputs
Two analog inputs
Switched power output for driving external devices
Internal flash memory for permanent storage of unit settings
Internal data buffer with backup battery eliminates data loss
Internal three-axis accelerometer with auto leveling
External J1708 engine interface (optional)
Panic alert mode
SCADA ready
Remotely programmable. Click here for details.

SPECIFICATIONS

Microprocessor                Zworld Rabbit RCM-3100
CPU Speed                      29 Mhz 8 bit.
Flash Memory                  256K
SRAM                             128K

Supply Voltage:                 7-36 VDC continuous operation
                                                           Load dump protected
                                                           Internal resettable fuse
                                                           Reverse polarity protection

Supply Current: (@12 v) Normal operation: 100 mA (no internal modems)
                                                           Cellular: Add   2 mA (220 mA during TX)
                                                           Satellite: Add 34 mA (180 mA during TX)
                                                           Wi-Fi:   Add 130mA (260mA during TX)
                                                           Sleep mode <10mA

Internal backup battery:    CR2032 Lithium cell
                                                           Three year shelf life. (battery in use only while power is disconnected)
Temperature Range:           -20 to 60 degrees C (operating)
                                          -30 to 60 degrees C (storage)
                                          -40 to 85 degrees C (storage with battery removed)

External Serial Ports:        RS-232 ESD protected
                                                          COM1 - full handshaking (unavailable when using internal Wi-Fi)
                                                          COM2 - full handshaking
                                                          COM3 - three-wire
Switched power output:      1.3 A max continuous (internal resettable fuse)
                                                        Load dump and short circuit protected (9 A max)

Digital Inputs:                    Maximum voltage range +/-200 V
                                                         Digital Low level < 1.7 V
                                                         Digital High level > 3.1 V
                                                        10K Pull up resistance (excluding IGN input)

Outputs:                            Low side switches
                                                       170 mA continuous per output (internal resettable fuses)
                                                       Short circuit protected (1.9 A max)

Analog Inputs:                 Maximum voltage range +/-200 V
                                                       Measurement range 0-36 V
                                                       12-bit resolution

GPS:                                 Tracks signals down to -160 dBm

Accelerometer:                 +/-2g range

STANDARD FEATURES

Choice of networks. GSM-GPRS and/or Satellite Iridium SBD
Dual mode network automatic switching
GPS reports stored when network is lost. Automatic download as soon as network link re-established.
GPS reporting based on speed, distance traveled, and events.
GPS time/location on speeding over set limits.
Reports based on sensor inputs.
Time/location reports based on stop/starts over X minutes stopped.
Remote control options. Up to four outputs.
Data can be transmitted "real time" or stored and downloaded based on time or file size.
Data stored while unit powered down.
Delayed power down. Programmable in seconds to 64 hours.
Engine idling and running hours.
Accelerometer motion sensor, three axis.

OPTIONAL MODULES

· Iridium QuakeGlobal 9601 SBD transceiver.

· GPRS modem. Enfora Enabler 3

· Ezurio Wi-Fi module.

OEM APPLICATIONS

The Tracker i50B fully assembled and tested circuit board can be purchased for installation into other 3rd. party enclosures. Contact Datalink Systems Inc. for more information.

i50B Tracker “G” force accelerometer standard feature.

SPECIFICATIONS

i50B Tracker
“G” force accelerometer standard feature.